|
| Brand Name: | RELIGHT |
| Model Number: | 19X21 |
| MOQ: | 100M |
| Price: | Contact us to get best price |
| Payment Terms: | T/T |
| Supply Ability: | 10000M/M |
Features
1- Anti-Glare UGR <15: Advanced optical design with a honeycomb coverto minimize glare and ensure visual comfort.
2- Adjustable Bending: Front/side flexible bending ,minimum bending diameter: 300mm,Each LED is protected by optimized circuit and structuraldesign, paired with superior heat dissipation for long-lasting durability.
3- Beam Angles: 15°, 30°, 25x45°, and other customizable options for versatile lighting effects.
4- Wall Washing Performance: High-efficiency illumination with uniform lightdistribution, no color deviation, and excellent glare control.
5- Waterproofgrade lP67
6- 3 years warranty
Technologies: ON/OFF
Application:
This product is ideal forengineering projects,indoor/outdoor decorationoutdoor lighting enhancement, and decorative illumination in buildingshotels, shopping malls, and similar commercial or architectural spaces.
Product Specifcations
| P/N | LED Quantity | CCT/K | CRI | LEDS/m | LUMENS (lm/m) | Vf/V | Current (mA/M) | Power (W/M) | Cut Length (MM) | Max Run (M) |
| RL-FV2414036283514-830-FWD1921 | 2835 | 2700 | 80/90 | 36 | 480 | 24 | 750 | 18 | 55.5 | 5 |
| 3000 | 480 | |||||||||
| 4000 | 500 | |||||||||
| 6500 | 500 |
Other Specifications
|
Protection grade |
IP67 |
|
Workingtemperature(℃) |
-25~+60 |
|
Standardlength(℃) |
-25~+70 |
|
Maximum cascade length(m) |
5 |
|
Maximum cascade length(m) |
5 |
Remark
· The test environment temperature is 25±2℃;
· The above data are typical values,the actual parameters of the product may be different from the typical data;the data is subject to change without notice;
· The above"/"means that this parameter is not required for the time being.
Installation Notes & Other Precautions
● Confirm all product parameters match your requirements
(refer to the "Product Specifications"document/manual or product label)
● Ensure the power supply and load voltage,current,and power ratings are compatible with this product
● Connect wires according to the wiring diagram (connect load before power supply/energizing) Take care to avoid short circuits during installation
● Ensure correct polarity alignment between product wires and power supply terminals (incorrect connection will prevent illumination)
● Power wires must be securely fastened in terminal blocks
(test by attempting to pull out by hand-wires should not come loose)
● All wiring terminals must receive proper waterproof and anti-corrosion treatment
Product Common Faults and Troubleshooting Methods
● Do not disassemble or modify this light.Sharp objects are prohibited from touching the LED surface.
● Live working is prohibited during installation.
● Do not use any oil-based chemical solvents.
● When using neutral silicone sealant to fix the product,it must be cured for more than 4 hours in a spacious and well-ventilated environment before enclosure.
● During installation,ensure all unconnected wire ends and branch connection points are properly insulated,waterproofed,and anti-corrosion treated as required.
● If extending the product's power supply cable,use 18AWG(0.75mm²cross-section)or thicker wire as specified to prevent overheating and potential hazards caused by excessive current.
● Before powering on,verify that the supply voltage meets requirements and the circuit is correctly installed.
● This product is designed for advertising signage purposes and should not be used as primary lighting.
● Strictly prohibit exceeding the maximum number of series connections or cascading length.
● The power cable between the power supply and product should not exceed the specified length (standard limit: 2 meters unless otherwise specified), as excessive length willincrease line loss and cause brightness inconsistency between the product's start and end points.
● Installation, maintenance, and repairs must be performed by qualified professionals; unauthorized personnel are strictly prohibited from conducting these operations.
